Commissioning of the KNX function via BJE DCA SmartTouch 10 (from
ETS5)
Product manual 2CKA001473B5342
│
102
9.10
Configuration of applications and application pages
The panel can contain applications with fixed functions (e.g. door communication). When these
applications are activated, they can be accessed via the application pages or the application
runs in the background. You can appropriately configure these applications beforehand.
Note
Basic settings for the panel, see chapter 9.6 “Configuring basic settings for the
panel“ on page 77.
9.10.1 Application
"Door
communication"
This application has an application page.
In the DCA you can activate the application and specify different basic settings.
1. Open the "Applications" tab in the library area.
2. Open the "Door communication" application.
– The basic settings are displayed in the "Parameter" area and can be edited here.
Further setting and selection options via the "Parameter" area, see chapter 9.10.1 “Application
"Door communication"“ on page 102.