KNX control elements and application parameters
Control element: "Value slider"
Product manual 2CKA001473B5342
│
166
10.12
Control element: "Value slider"
10.12.1 Name of the control element
Options:
<Name>
Naming the slider control element, e.g. name of the device that is to be controlled.
The length of the name is limited to 36 characters.
10.12.2 Name of room (otional)
Options:
<Name>
Naming a room in which the control element Split Unit Control is located.
The length of the name is limited to 36 characters.
10.12.3 Size of the button
Options:
1x1
1x2
2x2
The parameter is used to specify whether the control element occupies one column (one button
or control frame) or two columns (two buttons or control frames).
10.12.4 Function icon
Options:
<Icon>
Specifies an icon for the function of the button.
10.12.5 Display value in control element
Options:
Deactivated
Activated
The parameter is used to specify whether the value is displayed in the control element.
–
Deactivated
: No display. No additional parameters available.
–
Activated
: The following supplementary parameters are displayed:
Status value is controlled by a separate object:
Options:
Deactivated
Activated
An additional 1-bit communication object "Status value" is enabled via the parameter. If an
actuator has a separate object to feed back the status, it can be linked with a separate
feedback object.
Unit
:
Options:
<Text>
