Operation
Product manual 2CKA001473B5342
│
311
Blind (basic version can be further adjusted, e.g. with value display)
Blind control elements can be used to implement the activation of blinds, awnings, doors and
other motor-driven actuators.
Control
Status
Function
Blind
Stopping/starting in the middle (depending on
the operating mode). The button in the middle
can display the status. A corresponding
animation is displayed during the movement.
Operating procedure:
– Icons for Up/Down
Brief press of the button
Moving by a step (the icon in the middle does
not change).
Long press of the button
Moving up to stop (the icon in the middle
changes):
Stop
When the end stop has been reached or a
brief press on icon "Up / Down" (depending on
the direction of movement).
Change
Change in the direction of travel with a brief
press on icon "Up/Down". Followed by a long
press on icon "Up / Down" (depending on the
desired direction of movement).
– Icons in the middle (blind)
Brief press of the button
Moving up to stop (the icon in the middle
changes):
Stop
When reaching the limit stop or a brief press
of the button on the icon it stops in
intermediate position
.
