Operation
Product manual 2CKA001473B5342
│
347
12.7.6 System settings - User settings
The panel language and the function of sensors and door communication can be set within the
user settings. The user settings can also be reset.
Language
The language of the panel and the separators to be used can be specified via the "Language"
tab. Here a selection can be made from the specified options within the drop-down menu.
■
Language
Options:
<Language>
The parameter is used to specify the language of the panel.
■
Separator
Options:
<Decimal separator>
<Thousands separator>
The parameter is used to specify the type of the decimal (comma or full stop) and thousands
separator (comma or full stop).
Sensors
The "Sensors" tab can be used to specify how strong the haptic feedback of the panel is to be
when it is touched.
■
Activate haptic feedback
Options:
Activate
Deactivate
This parameter is use to activate or activate the haptic feedback. Then the vibration can be
adjusted with the slider (left = weak, right = strong).
■
Temperature
Options:
<Temperature>
<Wall type>
The parameter is used to specify the temperature unit. Also the type of wall can be specified,
since this has an effect on the temperature reading. The temperature is indicated in the status
display on the dashboard by activating the "Show temperature in the status display" checkbox.
