Bush Palace
Dominator
Setup Guide
© 2017 Bush Palace Camper Hire
8
•
Insert internal poles #13 at the front of the bed. They go into pockets in the canvas and clip
onto the forward support hoop. Make sure that the outside canvas is not pinched under
these poles or it will allow water to seep through the canvas.
•
Use 4 x spreader poles #7 to support the edges of the internal roof; these clip to the support
hoops.
•
Clip the tent to the body of the camper using the press studs & Velcro as appropriate.
The basic tent setup is now complete. It is worth going around and adjusting all poles &
spreaders now to make sure they are tensioned properly without being too tight. If they are too
tight is can stretch and damage the canvas, and will also increase the risk of heavy rain seeping
through seams.
Basic setup without awning
Setup with awning roof
Setup with full annex and ensuite
These are the three broad configuration options