14
2010 ST-6010 & ST-7210
Using The Optional Offset Adapter
I. Mowing in the Center Position
1. Attach the tractor lift arms to the mower and adapter at points “A” using the hitch pins,
Part# 2765, provided.
2. Attach the tractor top link to the clevis and adapter at point “B”.
3. Hook to the offset adapter is now complete.
II. Mowing in the Offset Position
Note: Always adjust the offset adapter with the mower disengaged from the tractor and
firmly on the ground. This will prevent the machine from becoming unstable and falling
onto the operator. Failure to do so might cause serious injury or death to the operator.
1. Attach Part D leaving the fasteners slightly loose. (Note: Part D also includes the top link
clevis)
2. Loosen Part A and slide Part A&D to the desired offset Position (up to 12”) and tighten
them securely into place.
3. Attach the mower to the tractor as stated in Part I except now the operator must attach the
top link to Part D.
Summary of Contents for ST-6010
