7
2010 ST-8410
Safety Warnings
Operations
Always inspect the area before mowing for potential mower hazards
.
Remove or avoid all foreign objects such as wire, cable, metal objects, and
all other foreign material.
Failure to do so could result in serious injury
to the operator or passerby from foreign material being thrown from
the mower
.
Thoroughly examine the rotary mower each day before operating. Tighten
loose bolts, nuts, and hydraulic fittings. Replace all damaged or broken parts,
including hydraulic hoses. If rotary mowers are not kept in proper working
order, they could be damaged and this could result in serious injury.
NEVER engage in repair work under the mower deck or any other
part of the mower that is raised off the ground until the mower is
safely and securely supported in the raised position. Inadequate
support can result in the mower falling, which could result in seri-
ous injury or death.
Use
proper signage
around working area. This will help the operator
have a safe place to work, and help passers by to take appropriate
precautions.
Use the proper
reflective devices
on the equipment to help prevent
accidents.
Make sure that all rules of the road are followed, and Slow Moving
Vehicle (SMV) rules are also observed
NEVER ALLOW ANYONE TO RIDE ON THE
MOWER OR THE TRACTOR.
This equipment, if not operated
properly, could be potentially dangerous; therefore,
NEVER ALLOW
A CHILD TO OPERATE A ROTARY MOWER.
Avoid hitting hard solid objects such as large rocks, concrete culverts, guard rails,
etc. This could cause serious damage to the machine. Broken machine parts or
pieces of the object can be thrown at very high speeds. This could result in serious
injury or death to persons at a considerable distance from the rotary mower.
Summary of Contents for ST-8410
