Bush 426/9665, Instruction Manual

11

Prune DAB stations

You can remove the DAB stations in the station list that cannot be received in your 
area.  These are listed with a ‘?’ prefix. 
1.  Press and hold the ‘Menu’ button on the Micro or on the remote control.  Use the  

 and 

 buttons on the Micro or on the remote control to move to <Prune>.  

Press the rotary control on the Micro to ‘Select’ or the ‘Select’ button on the 
remote control. 

2.  ‘Prune? <No> Yes’ is displayed.  Use the 

 and 

 buttons on the Micro or 

on the remote control to move to ‘Yes’.  Press the rotary control on the Micro 
to ‘Select’ or the ‘Select’ button on the remote control to prune the station list.  
Stations with a ‘?’ prefix will now no longer be displayed.  Press and release the 
‘Menu’ button on the Micro or on the remote control to exit the Menu. 

Storing a DAB station preset

Your Micro can store up to 10 DAB radio stations in its preset memories for instant 
access to your favourite stations.
1.  Tune the Micro to the DAB radio station that you wish to preset.
2.  Press and hold the   button on the Micro or the ‘Prog.‘ button on the remote 

control for approximately 2 seconds until ‘Preset store’ is displayed.

3.  Use the  

 and 

 buttons on the Micro or on the remote control to move to 

the preset location that you would like to store the radio station to (1-10).

4.  Press the rotary control on the Micro to ‘Select’ or the ‘Select’ button on the 

remote control. The display will confirm ‘Preset X stored’, where ‘X’ is the number 
of the preset (1-10). 
Note: If there is already an existing DAB station stored under a preset, it will be over 
written when you store the new station.

Tune to a DAB station preset

In DAB mode: 
1.  Press and release the   button on the Micro or the ‘Prog.‘ button on the remote 

control. ‘Preset Recall’ is displayed together with the number of the current preset 
location.

2.  Use the Use the  

 and 

 buttons on the Micro or on the remote control to 

move to the Preset location and station that you would like to listen to (1-10).

3.  Press the rotary control on the Micro to ‘Select’ or the ‘Select’ button on the 

remote control. The Micro will instantly tune to that station and begin to play. 
Note: If no DAB station has been stored under the preset button, ‘Preset Empty’ will 
be displayed, then the Micro will revert to the previously selected radio station after 
a few seconds.