8
Switch on
Press and release the ‘Power’ button on the Micro or the button on the remote
control to Switch on .
The first time you use the Micro or if the DAB station list is empty, your Micro will
automatically begin to scan for DAB radio stations.
DAB/FM Radio, CD, Bluetooth and AUX modes are available.
Please check the display, which will confirm the mode.
Note: Always make sure that the wire aerial is fully extended when listening to the
radio, to ensure the maximum signal strength and the best possible sound quality.
Switch off
Press and release the ‘Power’ button on the Micro or the button on the remote
control to go to Standby mode .
To completely power off the Micro, switch off the mains power at the wall socket.
Change the mode
Press and release the ‘Mode’ button on the Micro or on the remote control to change
the mode.
DAB/FM Radio, CD, Bluetooth and AUX modes are available.
Please check the display, which will confirm the mode.
Adjusting the volume
Turn the rotary volume control on the front of the Micro to adjust the volume. Turn
clockwise to increase the volume and anti-clockwise to decrease the volume. You can
also adjust the volume using the ‘Vol+’ and ‘Vol-’ buttons on the remote control.
Mute
Press and release the ‘Mute’ button on the remote control to mute the sound. ‘MUTE
ON’ will flash in the display.
Press and release the ‘Mute’ button again to turn this feature off and unmute the
sound.
Using your Micro
Summary of Contents for 426/9665
Page 1: ...Instruction Manual 426 9665 ...
Page 28: ...May 15 Issue 1 1 ...