10
Installation
Customer Helpline 0345 257 7271
Electric connection and safety (If available)
During the electric connection, follow the
instructions stated in the user manual
The earthing cable must be connected to the
earth terminal
You have to ensure the power cord with
suitable insulation to be connected to the power
source during the connection If there is no
appropriate earthed electric outlet in
accordance with regulations in the place where
the appliance to be installed, contact to our
authorized service. The earthed electric outlet
must be close to the appliance.
Do not use an extension cord
The power cord must not touch to the hot
surface of the product.
In case the cord is damaged, contact
Authorized Service to have it changed
Any wrong electric connection may damage
your appliance, as well as endangering your
safety, rendering your guarantee invalid
The appliance is adjusted for 230V 50Hz
electricity. If the mains electricity is different
contact your authorized service
.
•
.
•
.
•
.
•
•
.
•
.
•
.
•
•
.
The supply cord should be kept away from hot
parts of appliance. Otherwise, the cord may be
damaged, causing short circuit.
The manufacturer declares that it has no
responsibility against any kind of damages and
losses that are caused by improper connections
that are performed by unauthorized people
Figure 14
inner part
There are four pieces of adjustable feet inside the
product. Assemble the feet by screwing them into
their corresponding locations on the bottom of the
unit, as shown in figure 14. When the unit is put
into its final position, check that the unit is level. It it
isn't, rotate the inner part of the feet to adjust the
height. It is possible to raise the appliance a max.
of 50mm by rotating the feet. Once the feet have
been attached, you should move the machine by
lifting and placing it down again, you should not
drag it.
Adjustment of feet
L
N
B
R
O
W
N
GREEN
B
L
U
E