- 13 -
DAB+ Radio operation
Caution:
Before listening to the radio, please check that the DAB/FM Antenna is correctly
connected and adjusted for length and direction.
Tuning to DAB for the first time
Repeatedly press the
SOURCE
button on the unit or
button on the remote control to select
DAB source. The word “DAB” will be displayed on the display lens.
- The unit will start a quick scan to search for all available Band lll channels automatically.
- All available stations are programmed..
- The system will store all detected stations at completion of the scanning, the system will turn
to a station on the list.
- IF NO DAB service is available, “NO DAB” will be display.
Store DAB+ radio stations
Automatically
1. Repeatedly press the
SOURCE
button on the unit or
button on the remote control to
select DAB source. The word “DAB” will be displayed on the display lens.
2. Press the
SCAN
button on the remote control to activate automatic program mode. The word
“SCANNING” will be displayed on the display lens.
- All available stations are programmed..
- The system will store all detected stations at completion of the scanning, the system will
turn to a station on the list.
- IF NO DAB service is available, “NO DAB” will be display.
Manually
1. Tune to a radio station.
2. Press the
PROG
button on the remote control to activate program mode.
3. Repeatedly press the
H
/
G
buttons to allocate a number to this radio station.
- If you select more than 20, the preset number will be changed to “1” automatically.
4. Press the
PROG
button on the remote control again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store in memory with a preset number.
Tuning to a DAB+ radio station
Auto Tuning
Long pressing the
D
/
C
buttons for 2 seconds or more, the frequency changes down or
up automatically until a station is found.
Manual
Tuning
Repeatedly press the
D
/
C
buttons to change the frequency until you fi nd the station you
want.
