- 14 -
Tuning to preset DAB+ stations
- Repeatedly press the
H
/
G
buttons until the desired preset station is displayed. The unit
will tune to the selected station automatically.
- Use
the
0-9
buttons on the remote control to input a number directly and tune to the band
and frequency with this number. (e.g. To select preset number 5, directly press
0
,
5
buttons.)
DAB+ Information display
You can view the DAB+ service information in the following modes. Depending on the DAB+
radio station you are tuning to, some information modes may be unavailable. Repeatedly press the
DISPLAY
button on the remote control to view the following information.
•
Station
name
When an RDS station is received, the name of that station will be displayed.
•
Ensemble
name
This displays the name of the multiplex that contains the station you are listening to. A multi-
plex is a collection of radio stations that are bundled and transmitted on one frequency. There
are national and local multiplexes. Local ones contain stations that are specifi c to that area.
Note:
DAB+ – unlike normal radio, groups together several radio stations and transmits them
on one frequency.
•
Clock
This displays the current time provided automatically by the broadcaster.
•
Date
This displays the current date provided automatically by the broadcaster.
•
DLS (dynamic label segment)
Dynamic label segment is a scrolling message that the broadcaster may include with their
transmissions. The message usually includes information, such as programme details etc.
•
Signal
strength
This shows a number to indicate the signal strength which is between 0 and 100, for example
12, 70 or 100. The stronger the signal, the greater the number.
•
Programme
type
This describes the “style” or “genre” of the programme that is being broadcast.
•
Frequency
This shows the frequency of the current station.
•
Audio bit rate
The display will show the digital audio bit rate being received.
•
Stereo/Mono
The display will show if the station being received is in mono or stereo.