BASIC OPERATION
PREPARATION
1). Before turning on, check whether all the connection are correct and reliable. Insert the power plug
into the corresponding power socket.
2). Press STANDBY button on the front panel to turn on the player.
3). Press EJECT button on the remote control or panel to carry the disc tray outside, put the disc into
the tray, press EJECT button again, this unit starts reading and playing.
FAST FORWARD & FAST BACKWARD
In play status, press
7
button or
8
, there will be different speeds of fast forward or fast rewind at
the speed X2, X4, X8, X16, X32.
PREVIOUS & NEXT
In play status, press
9
button, the song/item will skip to the previous one for playback, press
:
button, the song/item will skip to the next one.
STANDBY
Press the Standby button on the remote control (or front panel)can switch on the unit or to the
standby mode.
In play status, press the STOP button once, the player will stop the playing; the stop point will be
memorized. Then press PLAY/PAUSE button, the disc will be played from the previous stop point.
If you press the Stop button twice, the stop point will not be memorized; press the PLAY/PAUSE
button, the disc will be played from the beginning.
STOP
In play status, press PLAY/PAUSE button on remote control, the player will pause, press again to
resume playback.
PLAY/AUSE
MUTE
In play status, if MUTE button is pressed, there will be no audio output, the sound is eliminated,
but the image will still be played normally. Then press this button again or press VOL. +/- button
to exit the mute status, the sound resumes to be its normal status.
VOLUME ADJUSTMENT
You can press the VOL-/+ button to turn up or down the volume of this unit.
NUMBER BUTTONS
Use NUMBER buttons to select tracks, frequency or stations etc. (eg. if you want to play track 12,
press the number button 1", then press 2".)
"
"
SOUND-FIELD SELECTION
Press the EQ button on the remote control or DSP button on the front panel to select different sound
fields: Jazz, Rock, Classic, Pop, Live, Dance and Off.
9
