P
arts Identification
10
Floor brush
Push the extension tube onto the hose handle, then fit the floor
brush to the extension tube. Alternatively, the floor brush can be
attached directly to the handle if preferred.
Fit the floor brush to the end of
the extension tube.
The selector on the floor brush
allows you to choose the most
appropriate setting for the type
of floor covering.
Height adjustable settings
The brush can be raised or lowered depending on the surface to
be cleaned.
• The brush down position is intended for use on non-carpeted
floors or short bristled carpets.
• The brush up position is intended for general use on all types of
carpet.
NOTE:
The brush down position can be used on carpets with a longer pile
to increase the amount of ‘pick-up’ for ground in dirt, but it also
increases the amount of force required to move the brush head
over the carpet.
Floor brush
Brush down Brush up
Floor type
selector
