15
(1). Aspect Ratio
You must set the display format to either 4:3 PanScan, 4:3 Letter Box,16:9
Full Screen or 4:3 Full, 16:9 Pillar Box, 16:9 PanScan Auto to get the
maximum display when watching TV.
(2). Resolution
If the video does not appear correctly, change the setting. This setting is to
match the most common setting for HDMI.
[480i]: for NTSC system TV.
[480P]: for NTSC system TV.
[576i] for PAL system TV.
[576P]: for PAL system TV.
[720P]: for NTSC or PAL system TV.
[1080I]: for NTSC or PAL system TV.
[1080P]: for NTSC or PAL system TV.
(3). TV format
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
(6) Video Setting
To access the Menu, press MENU then select [Picture]. The Menu
provides options to
adjust the video settings. Press UP/DOWN to select an
option and press RIGHT/LEFT to adjust that setting. Press EXIT to exit the
menu.
(7) Channel Search
and
M
S
C
s
to exit
M
To access the menu,press MENU
select [Search Channel]. The enu
provides options to adjust the earch hannel settings.
Select an option and press RIGHT/LEFT to adjust the setting .
Press EXIT
the enu
(4) Sort
Sort your channels from the following options:
[LCN] - Sort the channels in
ascending order
[Name] - Sort the channels in alphabetical order
[Service ID] - Sort the channels
according to the station
(5) LCN (Logical channel number)
Set LCN on or off.
