Bush FREEVIEWHD DV3 T2, Instruction Manual

Using your Set top box

Let’s get started

Using your Set top box

19

section of these instructions,  or online at 

www.argos-support.co.uk 

If you still require further assistance, call one of our experts on 

0345 604 0105.

Channel organiser

The channel organiser allows you to remove the ability 
to view certain channels. The channels can be added 
back after performing a scan (see Installation section).

1. 

Press the MENU button.

2. 

Use the      buttons to select the ORGANISER icon 
from the option bar.

3. 

Using the 

buttons select the ‘Channel 

Organiser’ option and press the OK button. After 
Pressing the OK button you will be asked for the 
default password ‘0000’.

4. 

The organiser displays the full list of channels in 
numerical order. Along the bottom of the panel 
is a key to explain which button operates which 
function.

• Lock

1

Prevents a channel from being 
viewed without the password ‘0000’

• Skip

2

Skips the channel when using the 
CH +/- buttons

• Delete

3

Delete’s the channel from being 
viewed at all. Until a new scan is 
performed

5. 

Using the 

buttons select a channel and press 

one of the option buttons 1,2 or 3. Repeat for any 
other channels you wish to edit.

6. 

Press the OK button to store the settings.

Teletext display

Press the TEXT button to display the channels teletext 
options. Not all channels support this feature.

Aspect ratio adjustment

To adjust the screen aspect ratio press the WIDE button 
and use the      buttons to change the aspect ratio. 
Press the OK button to store the setting.

Audio adjustment

To adjust the audio output from Stereo, Left or Right, 
press the AUD button and use the      buttons to switch 
between the modes. Press the OK button to store the 
setting.

Changing resolution (HDMI only)

If your TV is connected to the set top box with a HDMI 
cable there are several resolution options you can 
choose from.

Press the RES button to display the current resolution. 
Press again to skip to the next resolution. Repeat until 
you find the resolution you require.

Your TV may not support all resolutions. If the display 
is blank for longer than a few seconds, press the RES 
button, wait a few seconds and if the picture does 
not appear repeat the process until you see a picture 
once more.