Bush FREEVIEWHD DV3 T2, Instruction Manual

Using your Set top box

Let’s get started

Using your Set top box

21

section of these instructions,  or online at 

www.argos-support.co.uk 

If you still require further assistance, call one of our experts on 

0345 604 0105.

Advanced settings

OSD time out

Adjust the amount of time any on-screen menus 
appear for when they are not being used.

LPM in stand-by

Enabling the LPM mode allows less power to be used 
when the set top box is in standby mode.

when using this function the time for the set top box 
to wake from standby is slightly longer.

Auto power down

Choose how the set top box behaves when not in use. 
Enabling a timer from 1-3 hours will force the set top 
box into standby mode when not used for that period 
of time.

Select from Off, 1 Hour, 2 Hours or 3 Hours.

Software upgrade

S/W upgrade via OTA

Select this option to search for available software 
updates over the air.

No connection is required for these updates other 
than the aerial used for the set top box.

System configuration

Version

Select this option to display the current software 
version details. Press MENU to return back to the 
System Configuration menu.

Factory default

This function will erase all settings and stored channels 
and reset the set top box back to the default state it 
arrived in.

Any customised lists or settings will be erased.

When selecting this function, and option box checking 
you really want to perform this operation will appear. 
Select Yes and enter the default password ‘0000’. After 
a few seconds the set top box will re-start and proceed 
with the ‘First time installation’ process described on 
page 16.

Change password

Should you wish to change the default password from 
‘0000’ you can select this option and enter a new 
code.

The master override code should you forget your 
code is ‘3331’.

Diagnostics

Select this option to display diagnostic details. Press 
MENU to return back to the System Configuration 
menu.

Service information

Select this option to display service details. Press MENU 
to return back to the System Configuration menu.