Advanced features
Getting the most from your TV
Advanced features
48
If you require any technical guidance or
fi
nd that your TV is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions,
or online at
www.bush-support.co.uk
.
CI Card
To enter the CI Card menu, press the
[SOURCE]
button and select TV. Then press the
[MENU]
button and select CI
Card using the
[LEFT/RIGHT ARROW]
buttons and pressing
[OK]
when selected.
Pay per view services require a “smartcard” to be inserted into the television. If you subscribe to a pay per view service
the provider will issue you with a ‘CAM’ and a “smartcard”.
The CAM can then be inserted into the COMMON INTERFACE PORT (CI Card In).
This menu allows you to view information and change settings of CAM.
Advanced Options
To enter the Advanced Options menu, press the
[SOURCE]
button and select TV. Then press the
[MENU]
button and
select Advanced Options using the
[LEFT/RIGHT ARROW]
buttons and pressing
[OK]
when selected.
In this menu you can change various settings and the following modes are available:
Sound Tracks
- Allows the Audio Track to be selected.
Blue Mute
- Changes the background colour to blue when there is no input signal.
Default Channel
- Allows you to choose default Digital television channel, which will be displayed after television is
powered on.
Interactive Channel
- Turn the interactive television functionality on or o
ff
.
MHEG Pin Protection
- Turn PIN protection on or o
ff
.
HbbTV Settings
- Set various options for HbbTV.
Freeview Play Settings
- View the Freeview Play Terms and Conditions.
Subtitle
- Select your preferred subtitle language and type.
Teletext
- Language and region settings (if available).
Auto Sleep
- Controls the amount of time the set will continue to operate without any buttons being pressed on the
set or remote control before going into standby.
Options are: Never / 4 / 6 / 8 hours. The default setting is 4 hours.
System Information
- Shows system information.
Version Info
- Software version of the set.
Note
: In the case of poor signal reception, the quality and strength of the signal can be checked here. Both of these
must be at least 90% to ensure reliable reception.
Note
: This function is not currently used in the UK and ROI.
BUS-MAN-0035 - 32+ models.indd Sec1:48
BUS-MAN-0035 - 32+ models.indd Sec1:48
20/05/2021 17:28:20
20/05/2021 17:28:20