Advanced features
Getting the most from your TV
Advanced features
51
If you still require further assistance, call one of our experts on
0345 604 0105
, a Bush enquiry line.
(Calls are charged at the standard rate of your network provider).
Channel
This option allows you to tune in your set to the incoming RF or Satellite signal. You can con
fi
gure the settings
related to the type of broadcast being received. To enter this menu option, select the icon while on the Home
Page or press the
[MENU]
button on the remote control when in television mode, then go to Settings > Channel.
When selected, the options shown below are available:
There are three types of signal which can be tuned into, reception of these are dependent upon the signals being
received by your set and the country you are located in:
Digital Terrestrial Television – Also known as DVB-T1 and/or DVB-T2.
Cable Television – Also known as DVB-C.
Satellite Television – Also know as DVB-S1 and/or DVB-S2.
Options in the channel menu are:
Channels
- Tune and control channels.
Channel Installation Mode
- Terrestrial, cable or satellite.
Auto Channel Update
- Update channels automatically, on/o
ff
.
Channel Update Message
- Advise when channel update is available, on/o
ff
.
Parental Controls
- Set parental levels.
Audio Language
- Set the audio language track.
Open Source Licences
- View the licences online.
Version
- Software version.
Before tuning in your set, you will need to select the type of signal being received to enable tuning to operate
correctly. Enter the Channel Installation Mode to choose Antenna (terrestrial digital television), Cable or Satellite.
Depending upon which option is selected will change the options available in the Channels menu as shown in the
following pages.
BUS-MAN-0035 - 32+ models.indd Sec1:51
BUS-MAN-0035 - 32+ models.indd Sec1:51
20/05/2021 17:28:21
20/05/2021 17:28:21