HA32H4232LEKB
Energy Effi
ciency Class (SDR)
F
Power consumption (SDR)
21 W
Energy Effi
ciency Class (HDR)
N/A
Power consumption (SHDR)
N/A
Screen resolution (pixels)
1366 x 768
Screen Size (diagonal)
81 cm / 32 inches
RF
75 ohm Antenna / Analog / DVB / Satellite
Inputs
3 x HDMI, 2 x USB, Micro TF (MicroSD) card Reader, 1 x RJ45 LAN/Ethernet,
1 x Component/YPbPr, 1 x Composite/Video & L/R Audio shared for Composite/Video & Component/YPbPr
Sound Outputs
1 x Digital Optical Audio output, 1 x 3.5mm Headphone
Speaker/ Amplifi er Watts (RMS)
2 x 10 / 2 x 8
Voltage and power consumption
AC 220V ~ 240V; 50Hz
31/45/70W (eco mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
730W x 465H x 160D
Net weight (Kgs)
4.6
Wall Mounting
VESA 200 x 100 (mm)
Other information
Helpful technical information
Other information
83
If you still require further assistance, call one of our experts on
0345 604 0105
, a Bush enquiry line.
(Calls are charged at the standard rate of your network provider).
Updating Software
There are a number of ways in which the software on your set can be updated. When your set is produced, the
software installed will ensure the correct operation of the set, this may need to be updated should improvements be
made and this is normally carried out automatically if the set is connected to the internet.
Note
: For further support with software updates, contact our technical support team or refer to the ‘Product
Support’ section of the website. If the television is using the newest software available it will not attempt to update
the software.
If your set is outside of guarantee and the installation of the software causes a di
ff
erent issue you may be liable for
a chargeable repair service. The reason for this is because you may have a fault which can cause corruption on
one of the boards when installing the software. This could result in your unit locking into SAFE mode whereby it is
stuck in standby. This is not a fault with the software, this would be caused by an existing faulty board that would
have required a repair.
Specifi cations
BUS-MAN-0035 - 32+ models.indd Sec1:83
BUS-MAN-0035 - 32+ models.indd Sec1:83
20/05/2021 17:28:26
20/05/2021 17:28:26