Bush M55152SB, Instruction Manual

Installing your refrigerator

                                              19

Installing your refrigerator

Bringing it all together

Electrical connection

              Any electrical work that is required to 
              install this appliance MUST be carried out 
by a qualified electrician.

               Warning: THIS APPLIANCE MUST BE 
               EARTHED
Before making any electrical connections, 
ensure that:

.

Electrical safety is only guaranteed when the earth 

  system of your house is in accordance with the 
  related local regulations.

.

Do not damage the refrigerant circuit.

.

Do not bend, stretch or pull the supply cable to 

  avoid electric shock.

.

Do not use electrical appliances inside the food 

  storage compartments of the appliance, unless 
  they are of the type recommended by the 
  manufacturer.

.

Ensure the power socket is suitable for the 

  maximum power of the  machine (fuses in the 
  power circuit must be 13 amp).

.

The supply voltage should be the same as that 

  indicated in the technical specifications and the 
  appliance rating plate.

.

The appliance should be earthed and in 

  compliance with the applicable law.

.

When installed, the power socket must be within 

  easy reach.

.

If the socket outlets in your home are not suitable 

  for the plug supplied with this unit check with a 
  qualified electrician for replacement.

.

The use of adapters, multiple connectors or 

  extension cables are not recommended.

.

The appliance must be connected to a 220-240 

  volt 50Hz AC supply by means of a three pin 
  socket, suitably earthed and protected by a 13 
  amp fuse.

.

Should the fuse need to be replaced, a 13 amp 

  fuse approved to BS1362 must be used.

.

The plug contains a removable fuse cover that 

  must be refitted when the fuse is replaced. If the 
  fuse cover is lost or damaged, the plug must not 
  be used until a replacement cover has been fitted 
  or the plug is replaced.

.

A damaged plug should be cut off as close to the 

  plug body as possible, the fuse should be removed 
  and the plug disposed of safely. 
          

Plug replacement (UK & Ireland only)

Should you need to replace the plug; the wires 
in the power cable are coloured in the 
following way:

Blue  Neutral 'N'

Brown  Live 'L'

Green & Yellow  Earth 'E'

As the colours of the wires in the power cable 
may not correspond with the coloured 
markings identifying the terminals in your 
plug, and proceed as follows:

The green & yellow wire must be connected to 
the terminal in the plug that is marked with the 
letter E or by the earth symbol.

The blue wire must be connected to the 
terminal that is marked with the letter N.

The brown wire must be connected to the 
terminal that is marked with the letter L.

If the power supply cord is damaged, it must be 
replaced by the manufacturer or its service 
agent or a similar qualified person in order 
to avoid a hazard.