Bush WO377, Instruction Manual

Using your DAB Alarm Clock Radio

Let’s get started

Using your DAB Alarm Clock Radio

Let’s get started

Using your DAB Alarm Clock Radio

Using your DAB Alarm Clock Radio>

30

31

section of these instructions,  or online at 

www.bush-support.com 

If you still require further assistance, call one of our experts on 0345 600 3021.

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the 

Troubleshooting

Cancel the Sleep timer 

With your radio switched on (not in Standby mode):

1. 

Press and release the Select/Snooze/Sleep button.

2. 

Press and release the Tune- or Tune+ button until Sleep off is displayed. Press and 
release the Select button. 

Display backlight timeout

You can adjust the display backlight timeout. Options of permanently On, 10, 20, 30, 
45, 60, 90, 120, and 180 seconds are available. The current setting will have an ‘*’ in the 
display. 

With your radio switched on (not in Standby mode):

1. 

Press and hold the Menu/Info button to enter the menu options.

2. 

Press and release the Tune- button to scroll to 

<System>

. Press and release the Select 

button. 

3. 

Press and release the Tune+ button to scroll to 

<Backlight>

. Press and release the 

Select button. 

4. 

<Timeout>

 is displayed. Press and release the Select button. Press and release the 

Tune- or Tune+ button to scroll through the available backlight timeout options of On, 
10, 20, 30, 45, 60, 90,120 or 180 seconds. Stop when the backlight timeout you would 
like is displayed and press and release the Select button. 

<Timeout>

 will be displayed. 

You can now press and release the Tune- and Tune+ buttons to scroll and the Select 
button to confirm, as you did to set the Backlight timeout, to change the settings for 
the backlight brightness for the 

<Dim level>

 and 

<On level>

. There are 3 options 

available, High, Medium and Low.

Display language 

You can change the display language of your radio, there are 4 options available; English, 
French, German and Italian. An ‘*’ will be displayed Tune+ to the current setting. 

With your radio switched on (not in Standby mode):

1. 

Press and hold the Menu/Info button to enter the menu options

2. 

Press and release the Tune- button to scroll to 

<System>

. Press and release the Select 

button. 

3. 

Press and release the Tune+ button to scroll to 

<Language>

. Press and release the 

Select button. 

4. 

Press and release the Tune+ button to scroll to the language you would like. Press and 
release the Select button to confirm.