22
RETiCLE FRoM 10Th MiL To 38Th MiL
doWn on vERTiCAL STAdiA
The standard Horus grid is found from the 10th Mil down
on the vertical stadia to a total of 38 Mils. The Horus grid
evolves reticles beyond outdated crosshairs and mil dots.
The patented grid eliminates the need to adjust windage
or elevation knobs. As a result you find your target faster,
minimize frustrating mechanical factors and do away
with counting clicks. The standard Horus grid can be
used to mil targets and place holds at any range.
hoRiZonTAL STAdiA
The horizontal stadia holds a .2,.5,.8,1 Mil series from
center throughout it length. The same series is found
on the upper portion of the vertical stadia. Please note;
starting at the 3.5 Mil marking the reticle offers .1 Mil
markings for precise ranging. At the 4 Mil mark the
previous series of .2,.5,.8,1 Mil returns.
* For more information regarding the
Horus Vision TRMR2 Reticle please go to
www.horusvision.com or call 650-588-8862
CALCULATING FOR MOVERS
Calculations for movers have been designated by numbers (1-9). These numbers not only represent the elevation Mil markings as you move
down the stadia but also represent holds for movers moving at 4 mph. To adjust for 4 mph movers, first adjust for elevation and then move
reticle so the number is covering your intended target; send your shot.
RETICLE FROM 10
TH
MIL TO 38
TH
MIL DOWN ON VERTICLE STADIA
The standard Horus grid is found from the 10
th
Mil down on the vertical stadia to a total of 38 Mils. The Horus grid evolves reticles beyond
outdated crosshairs and mil dots. The patented grid eliminates the need to adjust windage or elevation knobs. As a result you find your target
faster, minimize frustrating mechanical factors and do away with counting clicks. The standard Horus grid can be used to mil targets and place
holds at any range.
HORIZONTAL STADIA
The horizontal stadia holds a .2,.5,.8,1 Mil series from center throughout it length. The same series is found on the upper portion of the vertical
stadia. Please note; starting at the 3.5 Mil marking the reticle offers .1 Mil markings for precise ranging. At the 4 Mil mark the previous series
of .2,.5,.8,1 Mil returns.
*For more information regarding the Horus Vision TRMR2 Reticle please go to
www.horusvision.com
or call
650-588-8862
Starting at the 3.5 Mil
mark you will find a series
of 5, .1 Mil markings
