4
For more details regarding using the still and video resolution options and other menu settings, please read the full instruction manual, available online at:
http://www.bushnell.com/customer_service/manuals.cfm
7) To review or playback a still photo or video, press the Enter button. You will see the most recent still photo or video. To review previous photos or videos one at a time, press
the Left key. To playback a video, press the SNAP button (press again to stop playback). To delete photos/videos, press MENU. Select
Delete One
(only the currently displayed
photo/video) by pressing Enter, then the Plus button to select “OK”, and press Enter to delete the file. If you wish to delete all photos/videos, use the
Format
menu option as
described earlier.
8) To download photos/videos to your PC or Mac, connect the USB cable from the SyncFocus to your computer. The SyncFocus will be recognized as a standard “USB Mass Storage”
device and will appear as a “Removable Disk” under the “My Computer” list (on Macs, an icon will appear on your desktop). The photo files are located in the “DCIM” folder on
this “Removable Disk”. Copy the files to your hard drive (drag or use the “copy files” option), then disconnect the camera. (On Mac computers, drag the “disk” that appeared
on your desktop when the camera was connected into your Trash to “eject” it before disconnecting.) The jpg standard files from the SyncFocus may be edited with any photo
software you choose to use.
NOTE: If you are not using an SD card in the SyncFocus, be sure to download all files from its internal memory before changing batteries and before storing the camera for a long period.
If you use an SD card, photos may also be downloaded by removing the card and using any USB card reader with an SD slot.
Your SyncFocus camera is already set for high resolution and quality right out of the box, and it is not necessary to change any of the settings to get good results.
However, many features and options are provided to enhance your enjoyment of the camera. For more information about them, please refer to the complete
instruction manual, available online at: http://www.bushnell.com/customer_service/manuals.cfm
Adjusting the Binocular IPD
The distance between the eyes, called “interpupillary distance,” varies from person to person. To set the hinge for your personal IPD:
Hold the binocular in the normal viewing position, with a firm grip on each side. Move the barrels closer together or further apart (Fig. 1) until you see a single circular field.
Always re-set your binocular to this position before using.
