1
Congratulations on your purchase of a Bushnell ImageView spotting scope. Before using the product,
please read the instructions contained in this manual and take time to familiarize yourelf with the
different parts and features of the product.
CAMERA OPERATION INSTRUCTIONS
BUTTON DESCRIPTIONS
The
MODE button
has three functions:
1. Power on: Press and hold button until the camera turns on. When the camera is connected to your
PC via the USB cable provided, the camera will power on automatically.
2. Power off: While the camera is on, press and hold the button until camera turns off. If camera has
not been used or if a button has not been pressed for over 2 minutes, the camera will automatically
power off to save battery life. If the camera is connected via the USB cable, it will not power off
except when PC is turned off.
3. Mode change: Press this button rapidly to change modes.
The
SNAP button
has two functions:
1. Take a picture: Press this button to take a picture when the camera is on. (But not in the PC mode
or mode change.
2. Select: In “Mode Change”, press this button to confirm the function.
78-7348 1LIM.indd 2
6/17/04 9:48:17 AM
