5
trouBlEsHootInG
unit will not turn on
1. Check that the batteries are installed correctly (2). If the batteries are installed correctly and the batteries are good, then the green
LED indicator light should be on steadily.
2. Check that the power button (3) has been pressed.
Power does not stay on
1. Replace the batteries when they become weak.
2. The unit normally turns off automatically after 2 minutes to conserve battery power. To defeat this, briefly press the IR switch.
Image is not focused.
1. Adjust the objective focus wheel (6) and eyepiece display focus (5).
2. Make sure you are not too close to the object you are viewing.
carE anD maIntEnancE
Your Bushnell Digital Night Vision device was designed to provide many years of reliable service. To ensure that you get the most
enjoyment out of your Digital Night Vision device, always obey the following warnings and precautions.
• Do not open the body of the device or otherwise attempt to service this device.
• Always store the device in a dry, well ventilated room.
• Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture.
• Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device incorporates a sophisticated
digital circuitry which could be damaged in extreme cases of misuse.
• Clean the optical lens with a professional lens cleaning supplies.
• Clean the exterior of the device with a soft clean cloth.
• Avoid removing the eyepiece as the LCD display could become damaged.
• Do not leave the device in direct sunlight or rain.
• Remove the batteries if the device will not be used for longer than a few weeks.
For any other problems or questions, please contact Bushnell Customer Service at:
(800) 423-3537 • www.bushnell.com
