7
sPEcIFIcatIons
Magnification:
3x
Objective Size:
32 mm
Battery Type:
Two CR123 (3v, lithium) batteries (not included)
Viewing Range:
1-328 ft. / .3-100m
Field of View:
70 ft @ 100 yds / 23m @ 100m
Operating Temperature Range:
14-104 / -10 ~ 40 C (Humidity >90%)
Dimensions:
5.9 x 3.8 x 2.0 in. / 150 x 95 x 51 mm
Weight:
13.4 oz. /380g
Tripod Mountable:
Yes
Video Out:
NTSC video standard.
Note: low ambient light operation may create low signal levels.
External AC Power Adapter:
6V DC, 1A, plug polarity=positive tip
FCC Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO
THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT.
Specifications and designs are subject to change without any notice or obligation on the part of the manufacturer.