18
Transfer the Course Data to the YP GPS Unit
If you still don’t see “Connected”
,
quit the Sync
app
(click Main Menu, then red “X” on top right
corner) and restart your PC (this will make sure
the driver is fully installed).
Re-start the Sync
application
from its desktop icon and try again
(follow the steps on the previous page).
After clicking
NEXT
, the
Step 2
screen lets you
choose the course you want from the files
stored in the Yardage Pro folder on your PC.
•
Click and
select the course
you want to send
to the YP GPS unit and
check its box.
You may
select more than one course file-they will all be
transferred in the next step. When you finish
selecting courses,
click
NEXT
.
• In
Step 3
,
click
SEND
to send (transfer) the
course data to the unit. You will see a progress
bar-the process can take a minute or two for
each course. Do not click
STOP
unless there is
a problem.
• When the transfer is complete,
the status bar
will indicate “Completed”
. You may then
click
FINISHED
, and disconnect the YP GPS unit after
turning it off. Select the Power Off option on
the unit’s main screen and tap
ENTER
.