Bushranger B2600, Operator'S Manual

7 

Limit the hours of operation. Try to fill each day 

with jobs where operating the brush cutter or 

other hand-held power equipment is not required. 

If you experience discomfort, redness and 

swelling of the fingers followed by whitening and 

loss of feeling, consult your physician before 

further exposing yourself to cold and vibration.

•  Always wear ear protection. Loud noise for 

long time can make hearing debase even lost 

hearing. Total face and head protection must 

be worn to prevent damage from fallon or 

branch. 

•  Wear non-slip heavy duty work gloves to 

improve your grip on the brush cutter handle. 

Gloves also reduce the transmission of 

machine vibration to your hands. 

•  WARNING: 

The cutter area is still dangerous 

while the machine is coasting to a stop.

DESCRIPTION

Safety Manual 

included with unit.

Read before operating and keep for future 

reference to learn proper, safe operating 

techniques.

Drive Shaft Assembly -

 Contains a 

specially designed liner and a flexible drive shaft.

D-Handle - 

This handle can be adjusted at your 

convenience for comfort.

Ignition Switch - 

“slide switch” mounted on top 

of the Throttle Trigger Housing. Move switch 

FORWARD to Stop, BACK to Run.

Safety Lever - 

Must be compressed before the 

throttle trigger is used to accelerate the engine.

Throttle Trigger -

 Spring loaded to return to idle 

when released. When accelerating, squeeze 

trigger gradually for best operating technique. Do 

not hold the trigger while starting.

Air Cleaner Cover -

 Contains replaceable foam 

element.

Fuel Tank -

 Contains fuel and fuel filter.

Purge Bulb - 

Pushing purge bulb (5 to 7 times 

before starting),will remove all air and stale 

fuel from fuel system and bring fresh fuel to the 

carburetor.

Choke - 

the choke control is located on the side 

of the filter cover. 

Cold Starts -

 Pull lever up to 

close choke for cold starts, push lever down for 

RUN position.

Throttle Control

Safety Lever

On/Off Switch

‘D’ Handle

Bent Shaft

Trimmer Head

Safety Guard

Throttle Trigger

Fuel Tank

Fuel Tank Guard

Muffler

Starter