|Black Max Compressor
Page 5
•
The air filter housing has a screw-on lid to gain access to the replaceable air
filter element inside. The compressor’s performance will be greatly reduced
by a clogged filter element. Old elements should be replaced before
performance is affected.
•
Your air compressor is equipped with a permanently lubricated, maintenance
free motor. Never try to lubricate compressor.
•
Regularly clean dust and dirt from compressor cooling fins and motor housing.
Before attaching the air compressor’s power cord to the 12 Volt D.C. power
source, check to make sure that the power switch is in the ‘Off’ position. For first
time use ensure air filter is fitted correctly (see page 7). Attach the Red battery
clamp to the Positive terminal of the battery and the Black battery clamp to the
Negative terminal of the battery, ensuring you have made a good connection.
Always keep your vehicle’s engine running while operating compressor to avoid
draining your vehicle’s battery.
Always make sure the portable compressor’s 2.4 metre power cord is uncoiled and
fully extended to avoid overheating of the power cord.
The air compressor comes with a heavy duty, heat resistant coiled air hose with a
quick connect air outlet fitting. Simply snap on this coil hose and you are ready to
inflate tyres. Also included is an in-line deflator / inflator device.
Maintenance
Tyre Inflation Operating Instructions
