|Black Max Compressor
Page 7
Remove the temporary protective red plug from the air inlet port.
Screw in the air filter unit & hand tighten. Do not use Teflon tape or
lubricants on the thread.
Unscrew the top lid to check if the element is correctly in place.
1.
2.
3.
The air compressor comes originally packed without the air filter unit fitted
Procedure:
Fitting Air Filter Unit
•
Do not disassemble. Do not attempt repairs or modifications. Your warranty
will be void if this instruction is ignored.
•
Do not use this product in an area where it can fall or be pulled into water or
other liquids.
•
The base tray is fitted to place a barrier between the compressor & sandy or
dusty ground, plus provide a stable operating platform, therefore keep the
tray clean at all times during use.
•
Use this compressor with 12Volt DC power only.
•
This product should never be left unattended during use.
Important Safety Instructions
