14
Stopping The Mower (Fig. 1)
• Raise the battery cover.
• Install battery.
• Lower the battery cover.
• Press and hold the start button (K). Pull the bail switch (L) toward the handle and
release the button to start the mower.
• To stop the mower, release the bail.
NOTE:
Power save feature automatically adjusts the cutting speed of the blades to match the application to give the
best possible cut while maximizing run time and battery life.
Setting Blade Height (Fig. 2)
When shipped, the wheels on the mower are set to a low-cutting position. Before
using the mower for the first time, raise the cutting position to the height best suited
for your lawn. The average lawn should be between 1 in. to 2 in. during cool
months and between 2 in. and 3-3/8in. during hot months
To adjust the blade height:
• To raise the blade height, grasp the height adjustment lever and move it toward
the front of the mower.
• To lower the blade height, grasp the height adjustment lever and move it toward
the back of the mower.
Mowing Tips
NOTE:
A sharp blade will greatly enhance the performance of the mower, especially when cutting high grass. Be sure to
check the blade and replace it when required.
WARNING
Power save feature automatically adjusts the cutting speed of the blades to match the application to give the best
possible cut while maximizing run time and battery life.
• Verify that the lawn is free of stones, sticks, wires, and other objects that could damage the blades or the motor.
These objects could be accidentally thrown by the mower in any direction, and could cause serious personal
injury to the operator and to others. In order to prevent electric shock, do not operate the mower in damp or wet
conditions.
• Do not mow in circles. Travel back and forth across the lawn.
• When cutting thick grass, reduce walking speed in order to allow for a more effective cut and a proper discharge of
the clippings.
• For a healthy lawn, always cut off one-third or less of the total length of the grass. The average lawn should be
approximately 1 to 2 in. (2.5 cm to 5 cm) long during cool months, and between 2 in. to 3-3/8 in. (5 cm to 8.5 cm)
long during hot months. If there is growth, the lawn should be cut in the fall.
USING THE PRODUCT
K
L
1
I
2
16
EN
USING THE PRODUCT
STARTING/STOPPING THE MOWER (1)
• Raise the battery cover.
• Install battery.
• Lower the battery cover.
• Press and hold the start button (K). Pull the bail
switch (L) toward the handle and release the
button to start the mower.
• To stop the mower, release the bail.
NOTE: Power save feature automatically adjusts
the cutting speed of the blades to match the
application to give the best possible cut while
maximizing run time and battery life.
SETTING BLADE HEIGHT (2)
When shipped, the wheels on the mower are set
to a low-cutting position. Before using the mower
for the first time, raise the cutting position to the
height best suited for your lawn. The average
lawn should be between 1 in. to 2 in. during cool
months and between 2 in. and 3-3/8in. during hot
months.
To adjust the blade height:
• To raise the blade height, grasp the height
adjustment lever and move it toward the front
of the mower.
• To lower the blade height, grasp the height
adjustment lever and move it toward the back
of the mower.
K
L
1
I
2
16
EN
USING THE PRODUCT
STARTING/STOPPING THE MOWER (1)
• Raise the battery cover.
• Install battery.
• Lower the battery cover.
• Press and hold the start button (K). Pull the bail
switch (L) toward the handle and release the
button to start the mower.
• To stop the mower, release the bail.
NOTE: Power save feature automatically adjusts
the cutting speed of the blades to match the
application to give the best possible cut while
maximizing run time and battery life.
SETTING BLADE HEIGHT (2)
When shipped, the wheels on the mower are set
to a low-cutting position. Before using the mower
for the first time, raise the cutting position to the
height best suited for your lawn. The average
lawn should be between 1 in. to 2 in. during cool
months and between 2 in. and 3-3/8in. during hot
months.
To adjust the blade height:
• To raise the blade height, grasp the height
adjustment lever and move it toward the front
of the mower.
• To lower the blade height, grasp the height
adjustment lever and move it toward the back
of the mower.
