Bushranger BRV2600, Operator'S Manual

10 

•  Replace the spark plug with a champion RCJ6Y, gapped to (0.6-0.7)mm. 

•  Use a wire hook to extract the fuel filter from inside the fuel filtank, and then remove and wash the 

filter in clean fuel. 

•  Before reinstalling the filter, inspect the condition of the fuel line. If damage or deterioration is noted, 

the machine should be removed from service until it can be inspected by a trained Bushranger™ 

service technician. 

       CAUTION

Never allow dirt or debris to enter the cylinder bore. Before removing the spark plug thoroughly clean 

the spark plug and cylinder head area. Allow the engine to cool before servicing the spark plug. Cylinder 

tightening or loosening the spark plug while the engine is hot can result in serious engine damage.

STORAGE 

(30 DAYS OR LONGER)

Cleaning

Thoroughly clean the machine exterior.

Inspection

Inspect the entire machine and tubes for damage, including loose or missing components, and repair as 

necessary.

Fuel

Drain the fuel tank, and the clear the carburetor and lines by running the machine until it stops from lack 

of fuel.

Lubrication

Remove the spark plug, and then pour a small amount of oil into the cylinder through the spark plug 

hole. Before reinstalling the spark plug, pull the recoil starter 2 to 3 times to distribute the oil over the 

cylinder walls.

Air Cleaner

Remove, clean, and reinstall the filter element as described under routine maintenance