Bushranger BRV2600, Operator'S Manual

11 

TROUBLESHOOTING

Problem

Likely Cause

Suggested Remedy

•  Out, or almost out, of fuel.

•  Spark plug dirty.

•  Spark plug not connected.

•  Fuel older than 3 months.

•  Water in the fuel tank.

•  Inlet grill not closed (blower 

vac only).

•  Dirty air filter.

•  Fill tank with fresh 2 stroke fuel (25:1).

•  Clean or replace with a new spark plug.

•  Press firmly on the terminal cover.

•  Drain stale fuel and replace with fresh 2 

stroke fuel.

•  Contact an authorised Bushranger

™

dealer.

•  Secure grill.

•  Clean or replace with a new 

Bushranger

™

 air-filter.

•  Dirty air filter.

•  Blocked fuel supply.

•  Fuel cap is not venting.

•  Incorrect type of fuel.

•  Clean or replace with a new 

Bushranger

™

 air-filter.

•  Ensure the fuel line is not pinched or 

blocked.

•  Ensure vent hole in the fuel tank cap is 

clear.

•  Drain tank and fill with 2 stroke fuel 

(25:1).

•  Dirty air cleaner filter.

•  Blocked fuel cap vent holes.

•  Clean or replace with a new 

Bushranger

™

 air-filter.

•  Ensure vent hole in the fuel tank cap is 

clear.

Engine does not start

Engine stops often

Engine looses power

Often, a depleted, loose, or dirty spark plug is responsible for a Blower Vac not being able to start, 

but there can be a number of other reasons. Refer below to the list of potential problems you may 

encounter, along with suggested remedies.

For servicing and all warranty work, contact your local authorised Bushranger™ dealer.