LOG SPLITTER
13
Hold the lifting handle and slowly lower the
beam. It will lock automatically. Double
check to make sure the beam bracket is
locked onto the beam.
2.
Do not let the beam suddenly drop.
Keep hands and fingers clear of
pinch or crush points at all times.
MANUAL TUBE
LOG CRADLES
Remove the cap from the manual tube.
Align the holes in the manual tube with
the holes in the tow bar. Insert and tighten
bolts and washers. (See
Figure 8
)
Reattach the cap.
1.
2.
M12x35
(x8)
Log Cradle (Right)
Outside Holes
Inside Holes
Figure 9
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
32
mm
13
mm
16
mm
19
mm
Beam Lock Bracket
Figure 7b
M8x20
(x2)
Manual Tube
Cap
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
Figure 8
2. Follow step 1 to assemble the left log cradle.
(See
Figure 9
)
1. Align the holes on the right log cradle to the
inside and lower holes on the beam mounts.
Insert the M12x35 bolts,
flat
washers, and
nuts and securely tighten.
M12 X 35
X 8
G
M8 X 20
X 2
F
LOG TABLE (OPTIONAL)
Refer to
Figures 9
and
10
to install the work
table. Remove the bolts, flat washers, and nuts
from the inside holes. Move the log cradle
from the incline position to the horizontal
position. Align the holes on the log cradle
with the outside holes on the beam mount.
Reinstall the bolts, flat washers, and nuts.
Place the work table over the holes in the log
cradle and align the 4 holes from the work
table plate and log cradle. Insert and tighten
the M10x25 bolts, spring washers,
flat
washers,
and nuts.
M10x25
(x4)
Work Table
Outside Holes
Log Cradle (Right)
Inside Holes
M10 X 25
X 4
8
16
mm
13
mm
18
mm
19
mm
30
mm
32
mm
Figure 10
