Bushranger REVO 10, Owner'S Manual

Keep tension on the rope to ensure it 

winds onto the drum tightly and evenly 

and does not sink into the lower layers. 

Release Hand brake and continue 

pulling until the vehicle is recovered.

Disconnect each end of the remote 

control lead from remote control and 

control box. For wireless controller, 

press and hold the POWER Button for 3 

seconds to deactivate controller. Store 

remote control in a safe, dry and easily 

accessible place.

Once the vehicle is secured, wind the 

remaining rope back onto the drum 

tightly and evenly and secure the hook 

firmly.

5) Begin winching

7) Disconnect remote control

6) Secure vehicle

ISOMETRIC VIEW

N.T.S.

FLAT PATTERN

.

SCALE 

ISOMETRIC VIEW

N.T.S.

FLAT PATTERN

.

SCALE 

Keep winching area clear. Do not allow 

people to remain in the area while 

winching. Never step over a live wire 

rope whilst under load.

Avoid the remote control lead from 

coming in to contact with the winch, 

rope or fairlead, as damage to the lead 

may result. 

Never guide a rope onto the drum with 

your hand. Use the supplied Pull Strap.

A winching operation requires extra  

consumption of battery power, so 

always maintain your battery and 

ensure it is in good condition.

Make sure the rope is wound onto the 

drum tightly and evenly. Allowing the 

rope to become loosely wound can 

result in binding, pinching and wedging 

between layers, ultimately damaging 

the rope, shortening its life and 

increasing the risk of injury and failure 

under load.

Always keep clear of the winch, rope, 

hook and fairlead while winching. 

Precautions whilst winching

| REVO VEHICLE RECOVERY WINCH

|REVO VEHICLE RECOVERY WINCH

Page 19

Page 20