22
Follow the steps below to implement the upgrades:
1.
Ready formatted a SD card;
2.
Copy the files of the new version of the software files
named "ISP_SD.bin" and "Rom_Code_D2_01 _ ***** -
**. Bin" into the SD card root directory.
3.
Insert SD card to camera, while press "OK" button switch
camera to “TEST” mode, after blue light flashes loosen the
“OK” button. The screen flashes then go black, and the blue
indicator flashes until restart.
4.
Upgrading is underway when the screen is black, please
don’t turn of the power. Otherwise users need to do the
upgrades again.
5.
Restart and check if the new version number is the same as
the old one, to confirm upgrade process succeed.
6.3 FAQ
6.3.1 Please do the following checks if camera can not
start or work normally
No battery;
Battery loaded reversely;
Run out of battery;
Battery is not in conformity with the specifications;
Not switch camera to “ON” mode;
Not insert SD card;
SD card is full or damaged;
SD card capacity exceed 64GB;
Sensitivity of PIR sensor too low.
