Chapter 4
User
Interface
Page 4-12
4.4.7 Type of Label Setting
The BK731 was designed to operate using two main types of labels, clear or solid
(transparent or opaque). Clear labels require backing paper that comes with two black
lines acting as leading and trailing edge for the peel point sensor to detect. In order to set
the type of label:
1. If the keypad does not say “OFFLINE”, press the
<Online>
key.
2. Press
the
<Labels>
button.
3. Press the Down arrow key until the display reads
“LABEL TYPE: CLEAR”
or
“LABEL TYPE: SOLID”
.
4. Press
<+>
or
<->
to change the setting to solid or clear labels.
5. Press
<Online>
to exit the Labels menu.
4.4.8 Peel Point Sensor Adjustment
The label sensor in the peel point assembly is a photo-sensor that detects the presence of
the label’s leading edge. Label sensor adjustment involves setting the gain such that its
beam is strong enough to pass through the label backer yet weak enough to be blocked by
the label. This adjustment should be made if there is a noticeable misalignment in the
placement of the labels on the product. To set the peel point sensor gain:
1. If the keypad does not say “OFFLINE”, press the
<Online>
key.
2. Press
the
<Labels>
button.
3. Press the Down arrow key until the display reads
“SENSOR VALUE: ###”
.
4. Press
the
<+>
or
<->
key to increase or decrease the sensor gain to an appropriate
value.
5. Press
<Online>
to exit the Labels menu.
6. Test the peel point sensor by referencing
. If the display indicates the
peel point is “BLOCKED” when a label is inserted between the peel point sections
and “UNBLOCKED” when only the backing paper is inserted, the setting is
correct. If not, repeat this section until the system operates properly.
Buskro Ltd.
BK731 Labeler
Summary of Contents for BK731
