TRANSPORT AND HANDING
When transportation, hold the base and lift the refrigerator
carefully with an angle inferior at 45 degree. Never hold
the door handle as support. Never place it upside down
nor horizontally. Push refrigerator on its basis and place it
thanks to its roller feet.
INSTALLATION
This refrigerating appliance is not intended to be used as a
built-in appliance.
To fix stably, the appliance must be placed on a flat and
solid surface. It should not be laid on any soft material.
Choose a location where there is no heat source. Keep
the refrigerator away from direct sunlight or other
appliance producing heat.
Choose a dry and well-ventilated place where there is no
corrosive air.
In order to improve efficiency of the cooling system and
save energy, it is necessary to maintain good ventilation
around the appliance for the dissipation of heat. For this
reason, sufficient clear space should be available around
the refrigerator.
The appliance is supplied with two plastic spacers. After
installation of these spacers, the appliance cannot be
pushed against the wall to maintain proper ventilation.
Insert the spacers into the relevant openings on the back
of the appliance, then screw the spacers tightly. Place the
appliance against a wall with a free distance that not
exceeding 75 mm but more than 50mm.
-45-
