19
18
Butchers & Bicycles
Butchers & Bicycles
MK1-E MY18 (A_01)
MK1-E MY17-18 (A_01)
When the cargo bike is loaded, it may
be easier to pull on the seat, instead of the
handlebars.
DANGER
Ensure the parking stand
is engaged before letting passengers enter
the box or loading cargo.
Releasing the parking stand
See illustration
K
Ɂ Stand beside the cargo bike and hold the
handlebar straight.
Ɂ Push handlebar forward, until the parking
stand folds up.
DANGER
When the cargo bike is
loaded, push on the seat, instead of the
handlebars. Keep your hand firmly on the
seat of the cargo bike after the parking
stand is released. Risk of the cargo bike
tipping forward!
CAUTION
Do not overload the cargo
bike. Refer to "" on page 12. Only engage
the parking stand on stable, flat surfaces
free of debris. Incorrect use of the kickstand
may cause damage to the mechanism. If you
experience poor operation of the parking
stand, have it inspected by a Butchers &
Bicycles authorised dealer.
LIGHT SYSTEM
The MK1-E cargo bike can be equipped with a
LED light system from Supernova. The lights
are powered from the Bosch eBike battery.
There are two headlights (
12
) that follow the
turning direction of the cargo bike and one rear
light (
24
).
Switching the lights on and off
The lights are switched on and off through the
On-board computer (
27
).
Ɂ Press the button marked
to turn the
lights on or off.
Ɂ The symbol
is displayed on the On-
board computer when lights are on.
DANGER
Do not ride in the dark
without functioning lights! Do not ride an
eBike with Supernova lights without the
eBike system battery installed. The lights
will not work and you will not be visible
on the road. Riding without lights is very
dangerous and may lead to an accident!
Even when the eBike battery is drained
and there is no motor support, the lights
will remain on for approximately 1 h. Charge
the battery immediately after returning
home.
Refer to the MK1-E eBike system
manual and Supernova manual available at
butchersandbicycles.com/support
Adjusting the lights
See illustration
L
Ɂ The angle of the headlights (
12
) shall
be adjusted so that the brightest point
of the light beam meets the ground at a
distance of 10 m in front of the eBike. The
adjustment can be performed using a 5
mm hex key.
Ɂ The angle of the rear light (
24
) shall
be adjusted so that the light beam is
horizontal. The adjustment can be
performed using a 2.5 mm hex key and a 6
mm wrench.
Servicing of lights
The Supernova lights do not require changing
bulbs. Advanced LED technology offers many
years of problem-free operation.
Ɂ For best performance and safety clean the
lenses of the lights with a soft damp cloth
when dirty.
CARGO BOX
Front door
The MK1-E cargo bike can be equipped
with a front door (
15
) that makes it easy for
passengers to get in and out of the box and
enhances visibility for the rider.
Ɂ
To open the door
pull up on the handle
marked
OPEN
(
16
). The lock releases and
the door can be opened.
Ɂ
To close the door
simply press it shut
(press near the lock).
CAUTION
Do not lean on or press
downwards on the top edge of the open
door! Damage to door may occur.
ISOFIX Interface
See illustration
D
All MK1-E cargo boxes are equipped with
a standard ISOFIX interface, as found in
passenger cars. This enables the installation of
a child seat equipped with compatible ISOFIX
fittings.
The interface is only compatible with
seats with a support foot designed to rest
on the vehicle's floor. The interface is not
compatible with top tether systems. Refer to
manufacturer instructions to determine if a
given child seat is compatible with MK1-E
and for installation instructions.
DANGER
It is not recommended to
ride the cargo bike with a child that is less
then 9 months old. Consult a paediatrician
before transporting your child in the cargo
bike.
Additional cargo box accessories
If your cargo bike is equipped with
additional accessories from
Butchers & Bicycles, please refer to user
manuals available at
butchersandbicycles.com/support
