INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 24 of 111
GB
AIKIDO.34LIGHT-AIKIDO.34LIGHTFI
7101-M001-0_B
SUMMARY
1.0 GENERAL INTRODUCTION _______ 27
2.0 INTENDED USE ___________________ 27
2.1 Training of personnel ________________ 27
3.0 SAFETY DEVICES ________________ 27
3.1 Residual risks________________________ 27
4.0 GENERAL SAFETY RULES ________ 28
5.0 PACKING AND MOBILIZATION
FOR TRANSPORT _________________ 28
6.0 MOBILIZATION ___________________ 29
7.0 UNPACKING ______________________ 29
8.0 INSTALLATION SPACE ____________ 29
9.0 ASSEMBLY AND PREPARATION
FOR USE __________________________ 30
9.1 Accessories contained in the packing _ 30
9.2 Assembly procedure__________________ 30
9.3 Electrical connection ________________ 31
9.4 Working area modification ___________ 31
10.0 ANCHORING SYSTEM ____________ 32
11.0 CONTROLS _______________________ 33
11.1 Control device (see Fig. 14) ___________ 33
11.2 Pedalboard (see Fig. 15) ______________ 34
12.0 USING THE MACHINE ____________ 34
12.1 Preliminary operations - Preparing
the wheel ____________________________ 34
12.2 Wheel locking ________________________ 34
12.2.1 Chuck height adjustment _________ 36
12.2.2 Reverse wheel pan protection ____ 36
12.3 Bead breaking through vertical rolls _ 37
12.4 Demounting the tyre _________________ 38
12.5 Tyre mounting _______________________ 40
12.6 Special use of the bead-breaker _______ 41
13.0 ROUTINE MAINTENANCE_________ 41
13.1 Replacement of the feeler pin _________ 42
14.0 FAULT - FINDING _________________ 43
15.0 TECHNICAL DATA ________________ 43
15.1 Weight _______________________________ 43
15.2 Dimensions __________________________ 44
16.0 STORING _________________________ 45
17.0 SCRAPPING _______________________ 45
17.1 Instructions for the dorrect
management of waste from electric
and electronic equipment (in italian
RAEE) according to legislative decree
151/05 _______________________________ 45
18.0 REGISTRATION PLATE DATA _____ 45
19.0 LIST OF COMPONENTS ___________ 45
