INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 28 of 111
GB
AIKIDO.34LIGHT-AIKIDO.34LIGHTFI
7101-M001-0_B
Fig. 3
IN CASE OF A CHANCE SUPPLY
FAILURE MOVE THE CONTROLS
TO THE NEUTRAL POSITION.
4.0
GENERAL SAFETY RULES
• Any tampering with or modification to the machine
not previously authorized by the manufacturer exempts
the latter from all responsibility for damage caused by
or derived from said actions.
• Removal of or tampering with the safety devices repre-
sents a violation of European Safety Norms.
• The machine may be used only in areas free from the
danger of explosion or fire.
• The use of only original accessories and spare parts is
advised. Our machine is designed to function only with
original accessories.
• Installation must be conducted only by qualified per-
sonnel exactly according to the instructions that are
given below.
• Ensure that there are no dangerous situations during
the machine operating manoeuvres. Immediately stop
the machine if it mis-functions and contact the assist-
ance service of an authorized dealer.
• Ensure that the work area around the machine is free
of potentially dangerous objects and that there is no
oil since this could damage the tyres. Oil on the floor
is also a potential danger for the operator.
• Operators must wear suitable work clothes, protec-
tive glasses, gloves, masks against the danger from
the spraying of dangerous dust, and possibly lower
back supports for the lifting of heavy parts. Dangling
objects like bracelets must not be worn, and long hair
must be tied up. Footwear should be adequate for the
type of operations to be carried out.
• The machine handles and operating grips must be
kept clean and free from oil.
• During inflation do not lean on the tyre or remain above
it. When beading in the tyre, keep hands away from
tyre and the rim flange.
• During inflation always stay to the side of the machine
and never in front of it.
5.0
PACKING AND MOBILIZATION FOR
TRANSPORT
The machine can be packed fully assembled. In this case
the cardboard box containing it has dimensions of
1730x1160x2200 mm.
Movement must be by pallet-lift or fork-lift trolley. The
fork lifting points are indicated on the packing.
