INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 35 of 111
GB
AIKIDO.34LIGHT-AIKIDO.34LIGHTFI
7101-M001-0_B
Fig. 19
Fig. 21
Fig. 20
Fig. 17
Fig. 18
To lock a rim proceed as follows:
1. Extract the central locking shaft and its cone (
Fig. 17
pos. 1
) through the proper handle (
Fig. 17 pos. 2
)
and, if necessary, turn it to make easy the extraction.
3. If the wheel hub is higher then the dragger (
Fig. 19
pos. 2
), use the extension (
Fig. 19 pos. 1
) supplied
on issue.
2. Dowel the wheel (
Fig. 18 pos. 1
) on the locking plat-
form and check that the dragging pin (
Fig. 18 pos. 2
)
enter in a hole placed on the rim hub.
4. Insert the shaft and the relative cone (
Fig. 20 pos. 1
)
on the rim (
Fig. 20 pos. 2
).
5. Turn of 90° (
Fig. 21 pos. 1
) and lift the shaft (
Fig. 21
pos. 2
) to hook it inner the hole.
