INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 28 of 43
Fig. 53
IN ORDER TO ALLOW THE AIR
JET TO BREAK BOTH BEADS,
DO NOT KEEP THE BEAD LIFTED
FORCING IT.
• Press completely downwards the inflating pedal, in
order to release a high pressure air jet through the
tubeless inflation nozzle.
• Keep partially pressed downwards the inflating pedal
to inflate the tyre and place the beads in their seats.
DO NOT EXCEED THE PRE-AR-
RANGED PRESSURE VALUES
WHILE SEALING THE BEAD.
• After the beads take place in their own seat, discon-
nect the inflating terminal and install again the valve
gear, that was removed previously.
Then connect the inflating terminal and inflate the
tyre with the required pressure.
IF THE TYRE GETS INFLATED TO
MUCH, IT IS POSSIBLE TO EX-
HAUST THE AIR FROM THE TYRE,
BY PUSHING THE MANUAL DE-
FLATING PUSH BUTTON LOCATED
UNDER THE PRESSURE GAUGE.
• Disconnect the inflation terminal from the valve.
13.0 ROUTINE MAINTENANCE
BEFORE CARRYING OUT ANY
ROUTINE MAINTENANCE OR AD-
JUSTMENT PROCEDURE, DISCON-
NECT THE MACHINE FROM THE
ELECTRICITY SUPPLY USING THE
SOCKET/PLUG COMBINATION AND
CHECK THAT ALL MOBILE PARTS
ARE AT A STANDSTILL.
BEFORE EXECUTING ANY MAIN-
TENANCE OPERATION, MAKE
SURE THERE ARE NO WHEELS
LOCKED ONTO THE SELF-CEN-
TRER.
To guarantee the efficiency and correct functioning
of the machine, it is essential to carry out daily or
weekly cleaning and weekly routine maintenance, as
described below.
Cleaning and routine maintenance must be conducted
by authorized personnel and according to the instruc-
tions given below.
• Disconnect the mains power supply before starting
any cleaning operation.
• Remove deposits of tyre powder and other waste
materials with a vacuum cleaner.
DO NOT BLOW IT WITH COMPRESSED AIR.
• Do not use solvents to clean the pressure regulator.
• The conditioning unit is equipped with an automatic
vacuum-operated drain therefore it requires no
manual intervention by the operator (see
Fig.
54
).
Fig.
_
54
PRESSURE REGULATOR
DEPRESSURE RELEASE
SEMI-AUTOMATIC
OILER
AIR
SUPPLY
1
7104-M009-2_B
AIKIDO.4 - AIKIDO.4FI