INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 27 of 67
11.4 Pedalboard (see Fig. 16)
“Pedal A”
has two maintained action operative po-
sitions. When it is pushed downwards it controls
mandrel clockwise rotary movement. When the pedal
is lifted upwards it operates the opposite movement.
THE MANDREL UNIT SPEED CAN
BE CONTINUOUSLY ADJUSTED
UP TO THE MAXIMUM SPEED
THROUGH A PROGRESSIVE PRES-
SURE ON THE PEDAL, ONLY IN
CLOCKWISE DIRECTION.
“Pedal B”
has a different function according to the
version present on the machine.
Version with inflation with pressure gauge
The inflation pedal in this version has only one func-
tion. A continuous pressure supplies air at a controlled
pressure (max 4.2 ± 0,2 bar 60 PSI).
Version with tubeless inflation
The inflation pedal has two functions. The supply of
air at a controlled pressure as in the previous version,
and a second function of a jet of air from the inflation
nozzle to assist the beading in of the tyre.
“Assent pedal C”
In “AUTO” mode (from PC) this pedal allows the ma-
chine to operate automatically. When released, the
machine stops automatically.
The machine can be stopped in case of programmed
functions as well: release and quickly press the assent
pedal again, which is equivalent to the “Start” from
the console.
THIS PEDAL IS NOT ACTIVATED IN
“MAN” AND “AUTO” MODE, AS IT
IS USED ONLY IN “PC MANAGED
AUTO MODE”.
2
1
2
1
0
A
B
C
KEY (pedal
ref. B
)
Ref. 1 - Tyre inflation with pressure gauge
Ref. 2 - Tyre inflation with pressure gauge + inflation
nozzle
Fig. 16
CAPTURE 4 - CAPTURE 4 FI
7104-M007-4_B
