INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 41 of 67
d. Starting from the position reached at point (c),
screw neck’s adjusting dowel counter-clockwise
of 2 complete turns (
Fig.
58 ref. 1
) and lock the
relevant counter nut (
Fig.
58 ref. 2
).
Fig. 58
e. Turn fulcrum-type screw (or screws) (
Fig.
59 ref. 1
)
in order to reset 0.1 ÷ 0.2 mm play between neck
(
Fig.
59 ref. 2
) and fulcrum-type screws’ head
(
Fig.
59 ref. 1
), letting nut (
Fig.
59 ref. 3
) rest
completely onto adjusting plate (
Fig.
59 ref. 4
).
Fig. 59
f. Operate cylinder (
Fig.
60 ref. 1
), supplying it with
compressed air, and make sure its stroke is in-
cluded between 5 ÷ 10 mm.
Fig. 60
g. Blow off cylinder and make sure the arm (
Fig.
61
ref. 1
) can slide freely in its guide (
Fig.
61 ref. 2
).
Fig. 61
h. Repeat points (f) and (g) 3 times at least.
CAPTURE 4 - CAPTURE 4 FI
7104-M007-4_B
