INSTRUCTION, USE AND
MAINTENANCE MANUAL
Page 26 of 36
GB
• Check the transmission belt (
Fig. 29 ref. 3
) for wear
or proper tensioning:
1. Undo the four retaining screws and remove tyre
changer side panel (
Fig. 29 ref. 1
);
2. Tension up the belt (
Fig. 29 ref. 3
) turning the
screws provided (
Fig. 29 ref. 4
) holding the
support (
Fig. 29 ref. 2
) of the motor;
3. Replace the belt (
Fig. 29 ref. 3
) if worn out us-
ing genuine parts;
4. Fit the tyre changer side panel before continuing
with assembly and disassembly procedure;
Fig. 29
ANY DAMAGE TO THE MACHINE
DEVICES RESULTING FROM THE
USE OF LUBRICANTS OTHER
THAN THOSE RECOMMENDED
IN THIS MANUAL WILL RELEASE
THE MANUFACTURER FROM ANY
LIABILITY!!
13.1 Lubricants
Special lubricant for mandrel movement control gear-
box. Use
ESSO GEAR OIL GX140
.
Lubricate slides and screws/nut screws or racks and
pinion with a soft brush using lubricant of
ESSO GP
.
ANY DAMAGE TO THE MACHINE
DEVICES RESULTING FROM THE
USE OF LUBRICANTS OTHER
THAN THOSE RECOMMENDED
IN THIS MANUAL WILL RELEASE
THE MANUFACTURER FROM ANY
LIABILITY.
7300-M023-0_B
HP441S.XX - HP441S.XXFI
HP441SQ.XX - HP441SQ.XXFI
