Page 25 of 38
INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
13.0 ROUTINE MAINTENANCE
To guarantee the efficiency and correct functioning
of the machine, it is essential to carry out daily or
weekly cleaning and weekly routine maintenance, as
described below.
Cleaning and routine maintenance must be conducted
by authorized personnel and according to the instruc-
tions given below.
• Disconnect the mains power supply before starting
any cleaning or routine maintenance operations.
• Remove deposits of tyre powder and other waste
materials with a vacuum cleaner.
BEFORE CARRYING OUT ANY
MAINTENANCE OPERATIONS,
MAKE SURE THERE ARE NO WHE-
ELS CLAMPED ON THE MANDREL
AND THAT ALL SUPPLIES TO THE
MACHINE HAVE BEEN DISCON-
NECTED.
DO NOT BLOW IT WITH COMPRESSED AIR.
• Do not use solvents to clean the pressure regulator.
• The conditioning unit is equipped with an automatic
vacuum-operated drain therefore it requires no
manual intervention by the operator (see
Fig. 49
).
1
PRESSURE REGULATOR
DEPRESSURE RELEASE
SEMI-AUTOMATIC
OILER
AIR
SUPPLY
Fig. 49
IN ORDER TO ENSURE A GOOD
FUNCTIONING AND TO AVOID THE
PRESENCE OF CONDENSATION
IN THE AIR TREATMENT UNITS
WITH SEMI-AUTOMATIC DRAIN,
IT'S NECESSARY TO MAKE SURE
ABOUT THE CORRECT POSITION
OF THE VALVE (FIG. 49 REF. 1),
PLACED UNDER THE CAP. TO
ACTIVATE A CORRECT DRAIN
FUNCTION, THE CAP MUST BE
ROTATED IN THE RIGHT WAY.
IN ORDER TO ALLOW A LONGER
LIFE OF THE FILTER AND OF ALL
MOVING PNEUMATIC DEVICES,
YOU HAVE TO MAKE SURE THAT
THE SUPPLIED AIR IS:
• EXEMPT FROM THE LUBRICAT
-
ING OIL OF THE COMPRESSOR;
• EXEMPT FROM HUMIDITY;
• EXEMPT FROM IMPURITY.
• Periodically, with a frequency of at least once a month,
lubricate the arms of the bead breaking roller and
of the tools.
• Immediately replace worn parts, bead breaking roller,
assembly tools.
• Every
week
and/or when necessary, top up the oil
tank using the filler hole provided, closed by a cap
or screw, on the lubricator filter.
N.B: This operation should not be carried out by
unscrewing the cup of the lubricator filter.
• The use of synthetic oil might damage the pressure
regulator filter.
SEIDO.30 - SEIDO.30FI
7105-M005-10_B