Fiqure 10
E.Cleaning Instructions
F.Kart Lubrication
G.Adjustment of Front And Rear Shock
Keep your kart clean.With a clean rag,wipe off all dirt and oil from around the controls
Wipe off any spilled fuel and oil.Keep the engine clean of foreign objects,and be sure
to check that the air intake fan is free of debris for proper cooling.
Lubricate the vehicle every 90 days of use.L ubrication should be done more often,if the
kart is used everyday.
There air five positions on each shock.
The default position is the middle set by
the manufacturer (see Fig.10)
Use a round nut wrench as you adjust
the shock,the tension of xhock spring will
increase as you screw to the left,decrease
as you screw to the right.Adjust according
to the weight of the riders.
a. Warm up the engine (5-10min)
b.Tighten the air screw gently.Backout 2-3/8 turns counter clockwise.
c.Connect the tachometer,adjust the throttle to limit the idle speed.The standard value is
1400RPM
d.Turn the air screw counter clockwise solwly and observe the RPM of the engine,stop
adjusting as the RPM reaches the top speed
e.Adjust the screw and adjust the idle speed to an ideal value.
f.Recheck and readjust the idle speed if necessary.
Fiqure 9
19
SERVICE INSTRUCTIONS
SCREWB
HTROTTLE
SCREWA
RIGHT ROTATE
LEFT ROTATE
Summary of Contents for Go-kart 300-1
