BroadcastVision Entertainment Technical Support
Telephone: 1(888) 330-4283 ext.3 Email: support@broadcastvision.com
Page 6
5.
Press the
right arrow key to start the auto scan.
6.
After scanning can press the
CH +, and
CH- buttons to see how many channels have
been saved. Your stb will usually output its signal on channel 3 or 4. Make sure the TV is on
the correct channel that displays the picture from the cable/satellite box before you proceed
to the next step.
7.
Finally, turn on
the CAB Enabled option to activate the CAB.
Connecting to the AV input (AV in):
1.
Press the
Settings icon in the upper right hand corner of the Main Menu page.
(Please refer to SENZA Manual for the Password)
2.
Turn on
the TV Enabled and CAB Enabled options and select TV Type AV in.
3.
Press the
CH +, and the
CH- below to test that the channels are changing.
After finishing the Cable/AV settings above, you must press
on
the top of the right corner of the screen.
5.
1.
2.
3.
